2011 Mazda 3
Mileage
110,075
Service Date
6/11/2024
Services Performed
- SPARK PLUGS – Remove & Replace – Normally Aspirated
- IGNITION COIL – Remove & Replace – Normally Aspirated
- A/C COMPRESSOR DRIVE BELT – Remove & Replace – 2.5L Eng – [Includes: Serpentine type Belt(s).]
- IDLER PULLEY – Remove & Replace – 2.5L Eng
- WATER PUMP DRIVE BELT TENSIONER – Remove & Replace – Normally Aspirated
- Clean Throttle Body, Fuel Injectors & Intake, Add Fuel Tank Cleaner
- Drain and fill transmission fluid with oem or equivalent transmission fluid. Road test vehicle.
- Replace Disc Brake Pads, Lubricate Caliper Sliders, Rapack Wheel Bearings (If Applicable), Road Test Vehicle
- Replace Disc Brake Pads, Resurface Rotors, Lubricate Caliper Sliders, Rapack Wheel Bearings (If Applicable), Road Test Vehicle
- Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
BRETT H. gave our service a 5 star review on 6/11/2024
